Proceedings of ASEAN - Pakistan Conference on Materials Science


  • held at NUST H-12 (Campus) Islamabad on 15 - 16 December 2008



Dr. Arnir Hussain

Important Factors for high Performance of Composites


Dr Bilal Khan, Dr. Zaffar Khan

Polymer Nanocomposites: Prospects, Potentials and Applications in Aerospace Structures


M Arshad Bashir, Noaman-ul-Haq, Shamshad Ahmed, M Bilal Khan
Synthesis and Mechanical Properties Evaluations of Ablative Materials


Priyo Sardjono, Bambang Prihandoko

Ceramic Graphite Composite as Anode of Lithium Battery


M. Anis-ur-Rehman, S. Nasir, A. Maqsood

Structural, Electrical and Magnetic Studies of Co-precipitated Ni-Co Nano-Ferrites


M Babar Saeed, M Fahim Hashmi

Control Of Thermoplastic Polyimide Properties Through Molecular Architecture


A. Haider, M  Shoaib, M  Asim, M Farooque
Comparative Investigation of Barium Titanate Ceramics Synthesized by Conventional
Powder and Sol-gel Techniques


Dr. Zaffar. M Khan

The On-Line Condition Monitoring System of Composite Structures Using Fiber Optic Sensors


Muhammad Faisal, Muhammad Shahid
Corrosion behavior of "ASTM A-106 Grade-A carbon steel in amine solutions
under sour conditions.


Mohammad Fuzail, Sabir Ghafoor Alvi, Shamshad Ahmed, Jamil Anwar
Study of the influence of DOP Mobilizer on the Mechanical and Thermal Properties
of the Irradiated Semi-Crystalline Ethylene-Propylene Copolymer


Syed Jawid Askari, Abid Hameed, Usama Umer, Ah Imran Merchant, Noman Danish
The Role of Nucleation Density and Methane Fraction in the Growth of Diamonds
Coatings and Titanium: A Review


Muhammad Mazhar Iqbal, Sajid Raza Ch

Design Optimization and Material Selection for Liquid Propellant Tanks


K Maaz, A. Mashiatullah, R M Qureshi, S. Karim, G. Ali, T. Javed

Morphological studies of NixCol-xFe2O4 ( 1) Magnetic Nanoparticles

M H. Saleh, E.A. Othman, F. Ismail, M Mohammad

Characterization of Nanocrystalline Neodymium Iron Boron (NdFeB) Magnetic Materials.


Nguyen Nang Dinft, Le Ha Chi, Tran Thi Chung Thuy, Hyung-Kook Kim

Characterization of multilayer organic light diodes using nanostructured composite thin films


Amir Habib, Nils stelzer, Roland haubner

Solvothermal synthesis of tetragonal BaTiO3


R.J. Talib, A.H Hashim, M A. Hamid, M R.M Toff , J. J. Mohamed

Mechanical and tribological properties of plasma carbonitrided stainless steel aisi 316


M. Bilal Khan, Saleem Hussain
Enhancement of Mechanical Properties of Kevlar-Epoxy Composite by Improving
the Interface Coupling


Sultan Mahmood, M  Bilal Khan, Toqeer Kausar, Faiz -ur- Rehman
Hot Drawing & Characterization of Ultra High Molecular Weight Polyethylene
(UHMWPE) Fibers to Produce High Impact Resistant & Light Weight Armor Composites


Zainul Huda
Recent Developments In Thermal Barrier Coatings (Tbc) On Turbine Blades
And Their Inspection Techniques


Syed J. Ali, Chaudhary J. Omer, Nasir M  Ahmad, Christopher J. Barrett, Muhammad I. Sarwar

Novel Functionalized Polymers Containing Photoresponsive Azobenzene
Chromophore: Synthesis and Characterization

A.Quddos, S.M.Hussain, A.Wadood, A.Hayat

Syntheses, Charcterization And Incorporation Of Nanoparticles Into The Polymer Matrix


A.S. Khan, F.S.L.Wong, LU.Rehrnan

Synthesis and in-vitro analysis of a novel bioactive nano-composite


Noaman Ul-Haq, Joong Kon Park, M  Bilal Khan, Khairuddin Sanaullah
Chiral Resolution of Phenylalanine using Ultrafiltration Technique by Molecularly
Imprinted Membrane


M. Bilal Khan

Intelligent Viscoelastic Polyurethane Intrinsic Nano Composites


Shamshad Ahmed, M  Junaid Afzal, Mazhar Mehmood
Role of Compatibilizers in Improvement of Mechanical and Thermal Properties of EPDM and Polypropylene Blends


Christian Lammel

Induction aided manufacturing of nano-filled polymers and CRFP



Engineering Sciences